With the plate hold-down you have the possibility in your company to avoid the fluttering of the plate during sawing and thus break-outs with thin plate thicknesses of 1 - 6 mm. The plate hold-down offers optimal contact pressure of the plate on the saw table.

Your benefits at a glance:

⌧ For a panel thickness of 1- 6 mm
⌧ No fluttering of the plate
⌧ Optimum contact pressure through a spring
⌧ Contact pressure by a roller right
and to the left of the saw blade

This article in application video:

Grooving acrylic glass and making boxes